PRODUCT

ANTI - VIBRATION CORK SLAB

PRODUCT INTRODUCTION

Anti Vibration Cork Slab is produced with granulated Cork Particles securely bound together with a synthetic resin of an insoluble nature.

ANTI-VIBRATION CORK SLAB MAIN APPLICATION

All machines or generators, compressor should be isolated in such a way so as to reduce and if possible eliminate the transmission of vibration and consequent noise to the building where in it is installed and the neighbouring building

CORK SLAB

Can satisfactority resolve problem of that nature and used with good results in the Anti-Vibratic isolation of foundation of heavy machinery reducing very considerably its transmission to the structure of the building.
TECHNICAL DATA

A
Loading in % Compression % Recovery Lbs./Squ.Inch (Mimimum 60% Load  Slab area of Slab)
25 Lbs/Squ.inch 48 85%
50 Lbs/Squ.inch 15.04% 85%
100 Lbs/Squ.inch 32.0% 85%
200 Lbs/Squ.inch 50.0% 85%

B. Compression due to loading in machine

Compression due to the load transferred to the base of the machine and in turn to the area of Cork Slab underneath this will be momentary and under this load Slab will recover back again,the Cycle will be followed

Rang of % Compression Recommended Slab -thickness
5.10%
10.15%
15.20%
20.30%
30.35%		 12 mm(1/2")
25 mm(1")
50 mm(2")
75 mm(3")
100 mm (4")
Above these Tickness more than 4" and up to 6" can be tried.
SIZE AND THICKNESS OF SHEETS
SHEETS SIZE
900 x 600 mm
(3' x 2')		 THICKNESS
12 mm
25 mm
50 mm
75 mm
100 mm
Anti Vibration Our quality ISCOVER - AV
PROPERTY
Product
Composition
 		 SPECIFICATION
Cork/ insolube
resin		 RESULT
Conforms
Resistance to
Handing		 Must not deform or break under normal handling Conforms
Recovery after
50% Compression		 90% Conforms
Strees at 50%
Compression		 Not less than 50 Psi not more than 1500 psi Conforms
Extrusion at
50% Compression		 0.26 inches Conforms
Boiling in
Hydrocloric Acid		 No disintegration Conforms
Boiling water
after our		 Expanding of 149% Conforms
Weathering test No Desintegration Conforms
ISOLATION CORKBOARD
  1. Concrete
  2. Layer of Cement
    mixed with sand at
    a ratio of 1:3
  3. Asphatic glue
  4. Isolation corkboard
  5. Asphaltic glue
  6. Screws
  7. Water-profing with cold asphaltic glue
  8. Join with asphaltic glue
Anti Vibration Pads are widely used in,

  

  Refrigeration Plants 
  Compressors 
  Conveyors 
  Air Conditioning Plants 
  Diesel Generators 
  Business Machines 
  Fans 
  Motors 
  Power / Impact Presses 
  Pumps

  1> Concrete Slab
  2> Tar or Waterproofing Compound (if necessary) 
  

 

Top